If your iPhone alarm didn’t go off, or you didn’t hear it, the cause is almost always one of a few settings: the alarm volume is turned down, the alarm’s Sound is set to None, or the alarm itself was off or set for the wrong time. Silent mode, Do Not Disturb, Focus and headphones are not the reason: Apple says Clock alarms still sound with all of them.
Below is every cause Apple documents, plus the common ones people run into, in the order worth checking.
1. The alarm volume is too low
Clock alarms play at your iPhone’s ringer and alert volume, not the media volume you use for music and video. That’s the most common surprise: the volume slider in Control Center and the buttons while a video plays change media volume, which has no effect on alarms.
To check it on iOS 26:
- Open Settings.
- Tap Sounds & Haptics.
- Drag the slider under Ringtone and Alerts most of the way up.
On iOS 27, alarms can have their own volume. In Settings › Sounds & Haptics, Apple’s alarm section has a Match Ringtone Volume switch: leave it on and alarms follow the ringer slider; turn it off and you get a separate alarm slider. If your alarm was quiet after updating, check both. There’s more detail in how to make your iPhone alarm louder.
The side buttons only change the ringer volume if Change with Buttons is turned on in Sounds & Haptics. If it’s on, it’s easy to turn your alarm down by accident while the phone is locked.
2. The alarm’s sound is set to None
An alarm with its Sound set to None only vibrates. Apple lists this as a reason an alarm seems silent.
- Open Clock and tap Alarms.
- Tap Edit, then tap the alarm.
- Tap Sound and choose a ringtone or song instead of None.
3. The alarm was off, or set for the wrong time
Each alarm has a switch next to its time in Clock › Alarms. It’s easy to switch one off after it rings and forget to switch it back on. Also check:
- AM or PM. A 6:30 alarm set for PM won’t help at 6:30 in the morning.
- Repeat. An alarm without repeat days rings once, then stays off. Tap the alarm and set Repeat if you need it every weekday.
- Your sleep schedule. The wake-up alarm from a sleep schedule in the Health app is separate from alarms you add in Clock. If you used Change Next Alarm Only, or turned off the schedule, the wake-up alarm may not have been set for this morning. You can see it in Clock › Alarms and tap Change to edit it.
4. You were using StandBy and expecting a vibration
Apple notes that when you use StandBy, haptics for your alarms are disabled. If your alarm only vibrates (see cause 2) and your iPhone was charging on its side in StandBy, nothing will happen. Give the alarm a sound.
5. The time on your iPhone was changed by hand
Apple advises against changing the time manually in Settings, because it can affect alarms. Keep Set Automatically on in Settings › General › Date & Time unless you have a reason not to.
(If it started right after an update, see iPhone alarm not going off after an update.)
6. Your iPhone was off or the battery ran out
No alarm can ring on a phone that’s switched off or flat. If you charge overnight, check the cable is seated and the battery icon shows it’s charging before you go to sleep.
7. You were looking at your phone when it rang
With Attention Aware Features on, Apple says your iPhone lowers the volume of alerts when it detects you’re looking at it. Apple doesn’t say whether this includes alarms, so it’s an unconfirmed cause. If your alarm seems quieter when you pick up the phone, you can turn the feature off in Settings › Face ID & Passcode › Attention Aware Features.
8. The alarm came from a third-party app
Since iOS 26, alarm apps can use Apple’s AlarmKit, which lets their alarms break through Silent mode and Focus like the Clock app’s. You have to allow it once per app, and you can change that later in Settings. If an alarm app didn’t ring, open Settings, find the app, and check it’s allowed to set alarms. Apps that don’t use AlarmKit can only send notifications, and Silent mode and Focus can silence those.
Not the cause: Silent, Focus and headphones
These get blamed a lot, but Apple is clear that Clock alarms still sound:
- with the Ring/Silent switch or Action button set to silent,
- with Do Not Disturb or another Focus on, including Sleep,
- with wired or wireless headphones connected: the alarm plays through the iPhone speaker and the headphones.
The full explanation is in does an iPhone alarm ring on Silent?
If it still doesn’t ring
- Set a test alarm two minutes from now, with the phone locked and the volume where you’d leave it overnight.
- If it’s quiet, go back through causes 1 and 2.
- Restart your iPhone and install any iOS update in Settings › General › Software Update.
- Still nothing? Contact Apple Support.
When you need more
If your alarm rings and you still sleep through it, the settings aren’t the problem. A louder, harsher sound and a second chance help most: Loud Alarm Clock rings through Silent and Focus with the app closed and adds backup alarms 3, 6 and 9 minutes later. It can’t go above your iPhone’s volume settings, so step 1 above still applies. For other ideas, see what to do if you sleep through every alarm. Not sure the app is worth it? See Loud Alarm Clock vs the iPhone Clock app.
Quick answers
Does my iPhone alarm go off if my phone is on Silent? Yes. Apple says Clock alarms sound when Silent mode, Do Not Disturb or another Focus is on.
Does an alarm go off if I’m wearing AirPods? Yes. Apple says the alarm plays through both the iPhone speakers and your wired or wireless headphones.
Will my alarm go off if my iPhone is off? No. The iPhone has to be on.
Why does my alarm only vibrate? Its Sound is probably set to None. Edit the alarm in Clock and pick a sound.
Sources
- How to set and change alarms on your iPhone, Apple Support
- Set an alarm in Clock on iPhone, iPhone User Guide
- Change iPhone sounds and vibrations, iPhone User Guide
- Change your wake-up alarm in Clock, iPhone User Guide
- Turn Attention Aware features on or off, Apple Support
- Wake up to the AlarmKit API, Apple Developer (WWDC25)